1.Snake skin, lizard skin

Accumulation of dirt is common between the scales of snake and lizard skins. Humid conditions also cause developing of mold on leather. Therefore, frequent wiping is required.

Scales on the surface of this type of leather are relatively fragile, so care should be taken when wiping and ensuring the correct direction of which to wipe. Dust and the environment will cause this type of leather to dry out, causing the cuticle to lift from the edges.

Binly’s top leather care series can be used for maintenance. Products certified by SGS do not harm the leather and the human body. They preserve the surface moisture of this type of leather, maintain its toughness, and restore its luster and elasticity.

However, it is only recommended for use on overly dry snake skin and occasional moderate maintenance.

Do not use leather oil, as it is non-volatile and will cause the pores of the leather to become clogged, making the leather surface sticky over time!

2.crocodile skin

Rare crocodile skin is expensive. Real crocodile skin has fine pores, so it will absorb water, leaving a dark watermark. However, the color will return to its original state after drying. Faux leather, on the other hand, will not absorb water or change color.

Do not use chemical solvents, alcohol, or ordinary leather maintenance solutions to wipe this type of leather, as they will destroy the protein structure of the leather, causing fading, hardening, and loss of luster.

Binly’s top leather care series can be used for maintenance. These products are certified by SGS and do not harm the leather or the human body. They preserve the surface moisture of this type of leather, maintain its toughness, and restore its luster and elasticity.

Painting is generally divided into two types: matte and gloss. The water-dyed effect without coating directly expresses the real texture of crocodile skin, and its luster will become more natural over time.

However, due to the special nature of the fabric, it is highly water-absorbent. When cleaning, use a damp cloth that is wrung out until nearly dry for wiping.

3.Ostrich skin

Because the ostrich leather contains a natural oil, it will not harden or crack in cold climates, and is softer than crocodile leather. Its tensile strength is 3-5 times that of cowhide, and it has the advantage of being crack-free and resistant to rubbing.

However, this type of leather is extremely sensitive to sunlight and strong heat sources, which may cause discoloration or deformation. Ostrich leather is super absorbent, so the color will darken when exposed to water, leaving a dark water mark, but the color will return to the original after drying.

For daily maintenance, you can use binly’s top leather care series. Products certified by SGS do not harm the leather and the human body. They preserve the surface moisture of this type of leather, maintain its toughness, and restore its luster and elasticity.

P.S. Rare leather products should be stored in a cool, normal temperature, non-humid, and relatively dry place that is not affected by external forces. Since the production process of each type of leather is different, please test it in an inconspicuous place before cleaning and maintenance, and then evaluate the use.

What should I do if the varnished leather is sticky? How to maintain it

Many people like the trendy, bright and fashionable sense of lacquer leather, but after buying the wallet and using it, you will find sticky and flowery scratches on the surface for a while. Let it lie in the cabinet forever, take it out every year and put it back day after day, now don’t be afraid, the BINLY maintenance group can help you maintain and restore~ the wallet is no longer sticky.

• Lacquer leather” sticky ~ cleaning and maintenance (cleaning agent, light film, leather emulsion)

  step one

  Spray the cleaning agent on a damp cloth with clean water and wipe it off, then wipe it with a cloth dampened with clean water to dry

  Step two

  After the brush is soaked in the light-sensitive film and lightly brushed, use a dry cloth to draw a circle and polish. Repeat the above actions to remove dirt and stickiness.

  Step three

  Use the leather milk provided with a sponge, knead a small amount of leather milk on the provided sponge, wipe it and wait for it to dry.

  Bag storage method: do not store it in a dust-proof bag, away from light, or in a damp place, do not put it together with other bags, try to put it in a ventilated place, please take care of it and store it before using it.

1. LV benzene dyed skin: dirty and sewage marks ~ cleaning and maintenance

(Cleaning agent, technical cotton, light-sensitive film)

step one

The cleaning agent is diluted with water, washed with a technical cotton brush, wiped with a damp cloth with clean water and waited for it to dry

Step two

Dip the brush with a small amount of light-sensitive film, lightly brush, and use a clean cloth to gently draw and polish

The above steps can be repeated

2. Lacquer leather" sticky ~ cleaning and maintenance

(Cleaning agent, light-sensitive film, leather milk)

step one

Spray the cleaning agent on a damp cloth with clean water and wipe it off, then wipe it with a cloth dampened with clean water to dry

Step two

After the brush is soaked in the light-sensitive film and lightly brushed, use a dry cloth to draw a circle and polish. Repeat the above actions to remove the dirt and stickiness.

Step three

Use the leather milk with a sponge, squeeze a small amount of leather milk and knead it, wipe it and wait for it to dry.

3. Grained cowhide: dirty and worn ~ cleaning, repair and maintenance

(Cleaning agent, light-sensitive film, leather milk)

step one

The cleaning agent is sprayed on a damp cloth with clean water and wiped off (the gap can be gently brushed with a soft toothbrush), and then wiped with a cloth dampened with clean water to dry

Step two

Dip the brush with a small amount of light-sensitive film and brush lightly, then use a dry cloth to draw a circle and polish

Step three

Use the leather milk with a sponge, squeeze the leather milk and knead it, wipe it and wait for it to dry

4. Lambskin: dirty, scratched and worn ~ cleaning, repair and maintenance

(Cleaning agent, light-sensitive film, leather milk)

step one

Spray the cleaning agent on a micro-drying non-woven cotton cotton, quickly and gently wipe it to dry, and then wipe it with water and a micro-dry non-woven cotton cotton until it is dry (the cotton cotton can be dry in the dirty area, you can use a little force,) the wiping time should not be too long Control humidity

Step two

Dip the brush with a small amount of light-sensitive film and brush lightly, then use a dry cloth to draw a circle and polish

Step three

Use the leather milk with a sponge, squeeze the leather milk and knead it, wipe it and wait for it to dry

5, 6, 7, 8. Twill, jacquard, coated canvas: dirty ~ cleaning and maintenance

(Cleaning agent, leather milk)

step one

Cleaner diluted with water

Brush gently with soft toothbrush

Wipe it with a cloth dampened with clean water and wait for it to dry.

Step two (coated canvas)

Use the leather milk with a sponge, squeeze the leather milk and knead it, wipe it and wait for it to dry

9. Suede: cleaning and maintenance

(Suede brush)

step one

Use a suede brush to gently brush away the dust

Please use a wet makeup sponge and spray detergent to wipe. It is recommended not to use technical sponges when cleaning.

(The following bags are all painted original leather)

test method:

You can use a cotton pad that is slightly dry with water to wipe on the benzene dyed leather. If the skin becomes darker (it will return to the original color after drying, it is benzene dyed leather), it has not been painted and can be used. It is recommended that it is not obvious Try it.

The bag will be dirty after use, so it is easy to mold. We must clean and maintain it before storing it, and then let it dry before receiving it in the dust bag.

The editor here tells you a method. When we shop online, the products will have shock-proof bubble cloth. Don’t lose it~ You can put it in the bag to prevent the body from being deformed. Do not use Xuan paper or cloth because the cloth and paper It will absorb water, and it will easily have a musty smell if it is placed in the bag without frequent replacement.

If you must avoid bag deformation, you can use seersucker to put it inside the bag, and it should not be too full or too little.

Do not stack the bags, the leather will be deformed or indented due to the stacking

The leather piercing chain should also be wrapped separately and placed in the bag to avoid leaving indentations on the bag.

Cheer for Taiwan, Binly is attentive to you~ All orders placed on the official website during the epidemic are free of charge (except for overseas shipments)

1. Bag leather goods should avoid long-term exposure to high temperature, sunlight, and light, which will cause deformation and fading of the leather.
2. Avoid overlapping, hanging or squeezing, which will force the leather to wrinkle and deform, and it will not be able to restore its original shape.
3. Before storage, the leather products must be cleaned and maintained and placed in a ventilated place to dry in the shade. A bubble cloth can be placed in the bag to shape the bag, and the bag can be taken out for half a year or a year, and maintained and ventilated once.
4. Leather products should be placed in a low temperature, low humidity and ventilated place. Avoid mildew. If the leather products become mildew, you can’t just wipe them with towel water or maintenance oil, because the wiping is only a surface treatment and cannot really remove the mold, which will easily cause the deterioration of the leather products and accelerate the aging.
5. Leather products, especially suede, are prone to produce white mold when they are damp, and in more serious cases, cyan and yellow molds appear, and the color of spots or plaques will show different shades.
6. It is forbidden to take it directly to the sun or to dry it with a hair dryer, which will cause the leather to become brittle and cracked.
7. You must take protective measures when you make a new bag, otherwise it will be difficult to clean completely if it is dirty or stained with the color of the clothes.
8. Please don’t put the leather bag on the window or near the wall next to the toilet, because it is easy to get wet.
9. Bags should not be placed in a moisture-proof box for a long time. They are likely to be too dry and inelastic. They will crack when taken out and used. It is recommended to take them out for maintenance for a period of time.

Welcome to join BINLY official account LINE ID:@binly

Receive 300 yuan shopping gold immediately

1.Applicable channel: BINLY official website

2.This shopping money cannot be combined with other special offers or activities.

3.Each person can claim once, and now receive a cash discount (single item over 3000 can be used).

~The company reserves the right to change the content of the event.